Assembly guide
NOUR Desk
Corner desk 140×140 · 1400 × 1400 × 748 mm · Item number nour-desk-corner-140
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Desk top, L-shaped | 1400 × 1400 × 18 | 1 |
| B | Modesty panel, back wall | 1290 × 300 × 18 | 1 |
| C | Modesty panel, side wall | 1272 × 300 × 18 | 1 |
| D | Apron, back wing end | 454 × 110 × 18 | 1 |
| E | Apron, back wing front | 818 × 110 × 18 | 1 |
| F | Apron, side wing end | 472 × 110 × 18 | 1 |
| G | Apron, side wing front | 782 × 110 × 18 | 1 |
Hardware
All supplied, in bags.
- ×5Tapered solid beech table leg 730 mm, oak-stained, Ø50→Ø34, with M8 hanger bolt, steel apron corner bracket and wing nut
- ×24Chipboard screw 3.5×16, pan head
- ×1Tapered solid beech table leg 730 mm, oak-stained, Ø50→Ø34, with straight mounting plate
- ×6Felt pad Ø28
- ×2Cable grommet Ø60
- ×14Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×14Cam cover cap Ø15, matching colour
- ×10Beech dowel Ø8×35, fluted
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.