Skip to content
ryhanah
Back to the product

Assembly guide

NOUR TV bench

TV bench 160, 2 drawers + open niche · 1600 × 400 × 480 mm · Item number nour-tv-bench-160

Before you start

  • About 1 h 45
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

CDEJ ×2N ×2ABFGHIL ×2M ×2K ×4
Ref.PartSize (mm)Qty
ASide panel left380 × 320 × 181
BSide panel right380 × 320 × 181
CTop panel1564 × 380 × 181
DBottom panel (drilled face down)1564 × 369 × 181
EBack panel1578 × 308 × 31
FDivider 1 (left half)367 × 284 × 181
GDivider 1 (right half)367 × 284 × 181
HDivider 2 (left half)367 × 284 × 181
IDivider 2 (right half)367 × 284 × 181
JDrawer front560 × 318 × 182
KDrawer side350 × 220 × 184
LDrawer sub-front465 × 220 × 182
MDrawer back465 × 206 × 182
NDrawer bottom479 × 339 × 32

Hardware

All supplied, in bags.

  • ×2Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×12Beech dowel Ø8×35, fluted
  • ×40Chipboard screw 4×30, countersunk
  • ×6Tapered solid beech leg 160 mm, oak-stained, Ø38→Ø26, with straight mounting plate
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    CDEJ ×2N ×2ABFGHIL ×2M ×2K ×4

    Hardware

    • ×12 Beech dowel Ø8×35
    • ×40 Chipboard screw 4×30
    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    CDEJ ×2N ×2ABFGHIL ×2M ×2K ×4
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×6 Tapered solid beech leg 160 mm
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    CDEJ ×2N ×2ABFGHIL ×2M ×2K ×4

    Hardware

    • ×2 Ball-bearing drawer slides
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp