Assembly guide
NOUR TV bench
TV bench 120, door + drawer + open niche · 1200 × 400 × 480 mm · Item number nour-tv-bench-120
Before you start
- About 1 h 30
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 380 × 320 × 18 | 1 |
| B | Side panel right | 380 × 320 × 18 | 1 |
| C | Top panel | 1164 × 380 × 18 | 1 |
| D | Bottom panel (drilled face down) | 1164 × 369 × 18 | 1 |
| E | Back panel | 1178 × 308 × 3 | 1 |
| F | Divider 1 (left half) | 367 × 284 × 18 | 1 |
| G | Divider 1 (right half) | 367 × 284 × 18 | 1 |
| H | Divider 2 (left half) | 367 × 284 × 18 | 1 |
| I | Divider 2 (right half) | 367 × 284 × 18 | 1 |
| J | Door left-hinged | 370 × 318 × 18 | 1 |
| K | Drawer front | 370 × 318 × 18 | 1 |
| L | Drawer side | 350 × 220 × 18 | 2 |
| M | Drawer sub-front | 275 × 220 × 18 | 1 |
| N | Drawer back | 275 × 206 × 18 | 1 |
| O | Drawer bottom | 339 × 289 × 3 | 1 |
Hardware
All supplied, in bags.
- ×2Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
- ×4Euro screw 6.3×13 (hinge plates)
- ×4Chipboard screw 3.5×16, pan head
- ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
- ×8Beech dowel Ø8×35, fluted
- ×27Chipboard screw 4×30, countersunk
- ×4Tapered solid beech leg 160 mm, oak-stained, Ø38→Ø26, with straight mounting plate
- ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×16Cam cover cap Ø15, matching colour
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 5
Build the drawers
Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.
Parts
Hardware
- 6
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 7
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.