Skip to content
ryhanah
Back to the product

Assembly guide

QAWS TV bench

TV bench 200, 2 doors + 2 drawers + open niche · 2000 × 400 × 480 mm · Item number qaws-tv-bench-200

Before you start

  • About 2 h 30
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

CDEVABTNUO ×2FGHIJKLMS ×2P ×4Q ×2R ×2W ×4
Ref.PartSize (mm)Qty
ASide panel left480 × 380 × 181
BSide panel right480 × 380 × 181
CTop panel1964 × 380 × 181
DBottom panel1964 × 380 × 181
EBack panel1978 × 328 × 31
FDivider 1 (left half)367 × 314 × 181
GDivider 1 (right half)367 × 314 × 181
HDivider 2 (left half)367 × 314 × 181
IDivider 2 (right half)367 × 314 × 181
JDivider 3 (left half)367 × 314 × 181
KDivider 3 (right half)367 × 314 × 181
LDivider 4 (left half)367 × 314 × 181
MDivider 4 (right half)367 × 314 × 181
NDoor left-hinged374 × 348 × 181
ODrawer front373 × 348 × 182
PDrawer side350 × 220 × 184
QDrawer sub-front279 × 220 × 182
RDrawer back279 × 206 × 182
SDrawer bottom339 × 293 × 32
TArched niche facade (fixed)493 × 348 × 181
UDoor right-hinged374 × 348 × 181
VPlinth back1964 × 130 × 181
WCentre support (recessed 206)136 × 130 × 184

Hardware

All supplied, in bags.

  • ×4Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
  • ×8Euro screw 6.3×13 (hinge plates)
  • ×8Chipboard screw 3.5×16, pan head
  • ×2Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×16Beech dowel Ø8×35, fluted
  • ×37Chipboard screw 4×30, countersunk
  • ×12Felt pad Ø28
  • ×44Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×44Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    CDEVABTNUO ×2FGHIJKLMS ×2P ×4Q ×2R ×2W ×4

    Hardware

    • ×16 Beech dowel Ø8×35
    • ×37 Chipboard screw 4×30
    • ×44 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    CDEVABTNUO ×2FGHIJKLMS ×2P ×4Q ×2R ×2W ×4
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    CDEVABTNUO ×2FGHIJKLMS ×2P ×4Q ×2R ×2W ×4

    Hardware

    • ×8 Chipboard screw 3.5×16
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    CDEVABTNUO ×2FGHIJKLMS ×2P ×4Q ×2R ×2W ×4

    Hardware

    • ×2 Ball-bearing drawer slides
  6. 6

    Step 6

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    CDEVABTNUO ×2FGHIJKLMS ×2P ×4Q ×2R ×2W ×4

    Hardware

    • ×4 Cup hinge Ø35
    • ×8 Euro screw 6.3×13 (hinge plates)
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×12 Felt pad Ø28
    • ×44 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp