Skip to content
ryhanah
Back to the product

Assembly guide

RIF TV bench

TV bench 160, 2 drawers + open niche · 1600 × 400 × 440 mm · Item number rif-tv-bench-160

Before you start

  • About 2 h 00
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

CDEJ ×2OPABN ×2FGHIL ×2M ×2K ×4
Ref.PartSize (mm)Qty
ASide panel left440 × 380 × 181
BSide panel right440 × 380 × 181
CTop panel1564 × 380 × 181
DBottom panel1564 × 380 × 181
EBack panel1578 × 338 × 31
FDivider 1 (left half)367 × 324 × 181
GDivider 1 (right half)367 × 324 × 181
HDivider 2 (left half)367 × 324 × 181
IDivider 2 (right half)367 × 324 × 181
JDrawer front560 × 336 × 182
KDrawer side350 × 220 × 184
LDrawer sub-front465 × 220 × 182
MDrawer back465 × 206 × 182
NDrawer bottom479 × 339 × 32
OPlinth front (recessed 40)1564 × 80 × 181
PPlinth back1564 × 80 × 181

Hardware

All supplied, in bags.

  • ×2Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×12Beech dowel Ø8×35, fluted
  • ×30Chipboard screw 4×30, countersunk
  • ×4Felt pad Ø28
  • ×28Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×28Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    CDEJ ×2OPABN ×2FGHIL ×2M ×2K ×4

    Hardware

    • ×12 Beech dowel Ø8×35
    • ×30 Chipboard screw 4×30
    • ×28 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    CDEJ ×2OPABN ×2FGHIL ×2M ×2K ×4
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    CDEJ ×2OPABN ×2FGHIL ×2M ×2K ×4
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    CDEJ ×2OPABN ×2FGHIL ×2M ×2K ×4

    Hardware

    • ×2 Ball-bearing drawer slides
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×28 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp