Assembly guide
SAFI Sideboard
Sideboard 120, 2 doors · 1200 × 420 × 800 mm · Item number safi-sideboard-120
Before you start
- About 1 h 15
- Two people needed
- 2 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 800 × 400 × 18 | 1 |
| B | Side panel right | 800 × 400 × 18 | 1 |
| C | Top panel | 1164 × 400 × 18 | 1 |
| D | Bottom panel | 1164 × 400 × 18 | 1 |
| E | Back panel | 1178 × 718 × 3 | 1 |
| F | Divider 1 (left half) | 704 × 387 × 18 | 1 |
| G | Divider 1 (right half) | 704 × 387 × 18 | 1 |
| H | Adjustable shelf | 562 × 377 × 18 | 2 |
| I | Door left-hinged | 738 × 598 × 18 | 1 |
| J | Door right-hinged | 738 × 598 × 18 | 1 |
| K | Plinth front (recessed 30) | 1164 × 60 × 18 | 1 |
| L | Plinth back | 1164 × 60 × 18 | 1 |
Hardware
All supplied, in bags.
- ×8Shelf pin Ø5, nickel
- ×4Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
- ×8Euro screw 6.3×13 (hinge plates)
- ×8Chipboard screw 3.5×16, pan head
- ×4Felt pad Ø28
- ×20Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×20Cam cover cap Ø15, matching colour
- ×4Beech dowel Ø8×35, fluted
- ×4Chipboard screw 4×30, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 5
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
Hardware
- 6
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 7
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.