Assembly guide
SAFI Sideboard
Sideboard 160, 3 doors + 3 drawers · 1600 × 420 × 800 mm · Item number safi-sideboard-160
Before you start
- About 3 h 00
- Two people needed
- 3 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 800 × 400 × 18 | 1 |
| B | Side panel right | 800 × 400 × 18 | 1 |
| C | Top panel | 1564 × 400 × 18 | 1 |
| D | Bottom panel | 1564 × 400 × 18 | 1 |
| E | Back panel | 1578 × 718 × 3 | 1 |
| F | Divider 1 (left half) | 704 × 387 × 18 | 1 |
| G | Divider 1 (right half) | 704 × 387 × 18 | 1 |
| H | Divider 2 (left half) | 704 × 387 × 18 | 1 |
| I | Divider 2 (right half) | 704 × 387 × 18 | 1 |
| J | Fixed shelf | 497 × 387 × 18 | 3 |
| K | Adjustable shelf | 495 × 377 × 18 | 3 |
| L | Door left-hinged | 541 × 531 × 18 | 1 |
| M | Drawer front | 531 × 195 × 18 | 2 |
| N | Drawer side | 350 × 150 × 18 | 6 |
| O | Drawer sub-front | 436 × 150 × 18 | 3 |
| P | Drawer back | 436 × 136 × 18 | 3 |
| Q | Drawer bottom | 450 × 339 × 3 | 3 |
| R | Door left-hinged | 541 × 530 × 18 | 1 |
| S | Drawer front | 530 × 195 × 18 | 1 |
| T | Door right-hinged | 541 × 531 × 18 | 1 |
| U | Plinth front (recessed 30) | 1564 × 60 × 18 | 1 |
| V | Plinth back | 1564 × 60 × 18 | 1 |
Hardware
All supplied, in bags.
- ×12Shelf pin Ø5, nickel
- ×6Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
- ×12Euro screw 6.3×13 (hinge plates)
- ×12Chipboard screw 3.5×16, pan head
- ×3Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
- ×22Beech dowel Ø8×35, fluted
- ×42Chipboard screw 4×30, countersunk
- ×4Felt pad Ø28
- ×40Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×40Cam cover cap Ø15, matching colour
- ×1Anti-tip wall strap kit (EN 16122)
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 5
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
Hardware
- 6
Build the drawers
Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.
Parts
Hardware
- 7
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 8
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 9
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.