Skip to content
ryhanah
Back to the product

Assembly guide

SHEBKA Desk

Desk 105×50 with drawer · 1050 × 500 × 750 mm · Item number shebka-desk-105

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ADMBCIGHKEFJ ×2L
Ref.PartSize (mm)Qty
ADesk top1050 × 500 × 181
BApron, end left422 × 100 × 181
CApron, end right422 × 100 × 181
DLattice modesty panel954 × 300 × 181
EApron, front left277 × 100 × 181
FApron, front right277 × 100 × 181
GDrawer runner left372 × 100 × 181
HDrawer runner right372 × 100 × 181
IDrawer front396 × 96 × 181
JDrawer side300 × 84 × 182
KDrawer sub-front339 × 84 × 181
LDrawer back339 × 70 × 181
MDrawer bottom353 × 289 × 31

Hardware

All supplied, in bags.

  • ×12Chipboard screw 3.5×16, pan head
  • ×4Slim steel desk / console leg 728 mm, 30×30 square tube, matt black, welded top plate 60×60 + 4 screws, levelling glide (+4 mm), drilled for the apron screws
  • ×1Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×8Beech dowel Ø8×35, fluted
  • ×12Chipboard screw 4×30, countersunk
  • ×1Cable grommet Ø60
  • ×18Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×18Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ADMBCIGHKEFJ ×2L

    Hardware

    • ×8 Beech dowel Ø8×35
    • ×12 Chipboard screw 4×30
    • ×18 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Slim steel desk / console leg 728 mm
  4. 4

    Step 4

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ADMBCIGHKEFJ ×2L

    Hardware

    • ×12 Chipboard screw 3.5×16
    • ×1 Ball-bearing drawer slides
  5. 5

    Step 5

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×1 Cable grommet Ø60
    • ×18 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp