Skip to content
ryhanah
Back to the product

Assembly guide

SHEBKA Desk

Desk 140×60 with drawer unit · 1400 × 600 × 750 mm · Item number shebka-desk-140-unit

Before you start

  • About 2 h 15
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ADFGJHIEO ×3K ×3BCL ×2P ×4MNQ ×2R ×2
Ref.PartSize (mm)Qty
ADesk top1400 × 600 × 181
BApron, end left522 × 100 × 181
CApron, end right522 × 100 × 181
DLattice modesty panel1304 × 300 × 181
EApron, front1340 × 100 × 181
FSide panel left440 × 430 × 181
GSide panel right440 × 430 × 181
HTop panel430 × 364 × 181
IBottom panel (drilled face down)419 × 364 × 181
JBack panel428 × 378 × 31
KDrawer front398 × 144 × 183
LDrawer side400 × 94 × 182
MDrawer sub-front303 × 94 × 181
NDrawer back303 × 80 × 181
ODrawer bottom389 × 317 × 33
PDrawer side400 × 99 × 184
QDrawer sub-front303 × 99 × 182
RDrawer back303 × 85 × 182

Hardware

All supplied, in bags.

  • ×12Chipboard screw 3.5×16, pan head
  • ×4Slim steel desk / console leg 728 mm, 30×30 square tube, matt black, welded top plate 60×60 + 4 screws, levelling glide (+4 mm), drilled for the apron screws
  • ×3Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×20Beech dowel Ø8×35, fluted
  • ×39Chipboard screw 4×30, countersunk
  • ×4Slim steel furniture leg 160 mm, 20×20 square tube, matt black, welded mounting plate + 4 screws
  • ×23Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×23Cam cover cap Ø15, matching colour
  • ×1Anti-tip wall strap kit (EN 16122)
  • ×1Cable grommet Ø60

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ADFGJHIEO ×3K ×3BCL ×2P ×4MNQ ×2R ×2

    Hardware

    • ×20 Beech dowel Ø8×35
    • ×39 Chipboard screw 4×30
    • ×23 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ADFGJHIEO ×3K ×3BCL ×2P ×4MNQ ×2R ×2

    Hardware

    • ×12 Chipboard screw 3.5×16
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Slim steel desk / console leg 728 mm
    • ×4 Slim steel furniture leg 160 mm
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ADFGJHIEO ×3K ×3BCL ×2P ×4MNQ ×2R ×2

    Hardware

    • ×3 Ball-bearing drawer slides
  6. 6

    Step 6

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×23 Cam cover cap Ø15
    • ×1 Cable grommet Ø60

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp