Assembly guide
SHEBKA Dining table
Dining table 160×90, 6 seats · 1600 × 900 × 750 mm · Item number shebka-dining-table-160
Before you start
- About 1 h 00
- Two people needed
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Table top | 1600 × 900 × 18 | 1 |
| B | Top doubling strip, long | 1600 × 120 × 18 | 2 |
| C | Top doubling strip, short | 660 × 120 × 18 | 2 |
| D | Top stiffening strip, centre | 660 × 120 × 18 | 1 |
| E | Apron, back | 1520 × 100 × 18 | 1 |
| F | Apron, front | 1520 × 100 × 18 | 1 |
| G | Apron, end left | 784 × 100 × 18 | 1 |
| H | Apron, end right | 784 × 100 × 18 | 1 |
| I | Cross rail | 784 × 80 × 18 | 1 |
Hardware
All supplied, in bags.
- ×16Chipboard screw 3.5×16, pan head
- ×4Slim steel table leg 710 mm, 30×30 square tube, matt black, welded mounting plate + 4 screws, levelling glide
- ×18Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×18Cam cover cap Ø15, matching colour
- ×12Beech dowel Ø8×35, fluted
- ×21Chipboard screw 4×30, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.