Skip to content
ryhanah
Back to the product

Assembly guide

SHEBKA Dining table

Round dining table Ø100, 4 seats · 1000 × 1000 × 750 mm · Item number shebka-dining-table-round-100

Before you start

  • About 45 min
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABCDEF
Ref.PartSize (mm)Qty
ATable top, round Ø1001000 × 1000 × 181
BTop doubling disc (underside)1000 × 1000 × 181
CApron A670 × 100 × 181
DApron B670 × 100 × 181
EApron C634 × 100 × 181
FApron D634 × 100 × 181

Hardware

All supplied, in bags.

  • ×16Chipboard screw 3.5×16, pan head
  • ×4Slim steel table leg 710 mm, 30×30 square tube, matt black, welded mounting plate + 4 screws, levelling glide
  • ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×8Cam cover cap Ø15, matching colour
  • ×8Beech dowel Ø8×35, fluted
  • ×8Chipboard screw 4×30, countersunk

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABCDEF

    Hardware

    • ×16 Chipboard screw 3.5×16
    • ×8 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×8 Beech dowel Ø8×35
    • ×8 Chipboard screw 4×30
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Slim steel table leg 710 mm
  4. 4

    Step 4

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×8 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp