Assembly guide
ZAHRA Toy storage
Toy storage, narrow tall · 336 × 440 × 978 mm · Item number zahra-toy-storage-tall-1
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 978 × 420 × 18 | 1 |
| B | Side panel right | 978 × 420 × 18 | 1 |
| C | Top panel | 420 × 300 × 18 | 1 |
| D | Bottom panel | 420 × 300 × 18 | 1 |
| E | Back panel | 896 × 314 × 3 | 1 |
| F | Plinth front (recessed 30) | 300 × 60 × 18 | 1 |
| G | Plinth back | 300 × 60 × 18 | 1 |
Hardware
All supplied, in bags.
- ×4Felt pad Ø28
- ×12Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×12Cam cover cap Ø15, matching colour
- ×4Beech dowel Ø8×35, fluted
- ×1Anti-tip wall strap kit (EN 16122)
- ×2Toy bin S 296×398×104 mm, ZAHRA colour
- ×1Toy bin M 296×398×230 mm, ZAHRA colour
- ×1Toy bin L 296×398×356 mm, ZAHRA colour
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
- 5
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 6
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.