Skip to content
ryhanah
Back to the product

Assembly guide

ZAHRA Toy storage

Toy storage, tall, 3 columns · 1008 × 440 × 978 mm · Item number zahra-toy-storage-tall-3

Before you start

  • About 1 h 00
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EABCDFGHIJK
Ref.PartSize (mm)Qty
ASide panel left978 × 420 × 181
BSide panel right978 × 420 × 181
CTop panel972 × 420 × 181
DBottom panel972 × 420 × 181
EBack panel986 × 896 × 31
FDivider 1 (left half)882 × 407 × 181
GDivider 1 (right half)882 × 407 × 181
HDivider 2 (left half)882 × 407 × 181
IDivider 2 (right half)882 × 407 × 181
JPlinth front (recessed 30)972 × 60 × 181
KPlinth back972 × 60 × 181

Hardware

All supplied, in bags.

  • ×4Felt pad Ø28
  • ×28Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×28Cam cover cap Ø15, matching colour
  • ×4Beech dowel Ø8×35, fluted
  • ×6Chipboard screw 4×30, countersunk
  • ×1Anti-tip wall strap kit (EN 16122)
  • ×4Toy bin S 296×398×104 mm, ZAHRA colour
  • ×4Toy bin M 296×398×230 mm, ZAHRA colour
  • ×3Toy bin L 296×398×356 mm, ZAHRA colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EABCDFGHIJK

    Hardware

    • ×28 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×4 Beech dowel Ø8×35
    • ×6 Chipboard screw 4×30
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    EABCDFGHIJK
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EABCDFGHIJK
  5. 5

    Step 5

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×28 Cam cover cap Ø15
    • ×4 Toy bin S 296×398×104 mm
    • ×4 Toy bin M 296×398×230 mm
    • ×3 Toy bin L 296×398×356 mm

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp