Skip to content
ryhanah
Back to the product

Assembly guide

NOUR Desk

Desk 105×50 with drawer · 1050 × 500 × 748 mm · Item number nour-desk-105

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABMIGHCDKEFJ ×2L
Ref.PartSize (mm)Qty
ADesk top1050 × 500 × 181
BModesty panel (back apron)990 × 300 × 181
CApron, end left354 × 110 × 181
DApron, end right354 × 110 × 181
EApron, front left277 × 110 × 181
FApron, front right277 × 110 × 181
GDrawer runner left372 × 110 × 181
HDrawer runner right372 × 110 × 181
IDrawer front396 × 106 × 181
JDrawer side300 × 94 × 182
KDrawer sub-front339 × 94 × 181
LDrawer back339 × 80 × 181
MDrawer bottom353 × 289 × 31

Hardware

All supplied, in bags.

  • ×4Tapered solid beech table leg 730 mm, oak-stained, Ø50→Ø34, with M8 hanger bolt, steel apron corner bracket and wing nut
  • ×16Chipboard screw 3.5×16, pan head
  • ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×16Beech dowel Ø8×35, fluted
  • ×12Chipboard screw 4×30, countersunk
  • ×4Felt pad Ø28
  • ×1Cable grommet Ø60
  • ×12Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×12Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABMIGHCDKEFJ ×2L

    Hardware

    • ×16 Beech dowel Ø8×35
    • ×12 Chipboard screw 4×30
    • ×12 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Tapered solid beech table leg 730 mm
  4. 4

    Step 4

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABMIGHCDKEFJ ×2L

    Hardware

    • ×16 Chipboard screw 3.5×16
    • ×1 Ball-bearing drawer slides
  5. 5

    Step 5

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×1 Cable grommet Ø60
    • ×12 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp