Skip to content
ryhanah
Back to the product

Assembly guide

RIF Desk

Desk 105×50 with drawer · 1050 × 500 × 750 mm · Item number rif-desk-105

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Allen key (supplied)
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABCDEFHMGJ ×2IKL
Ref.PartSize (mm)Qty
ADesk top1050 × 500 × 181
BLeg left, outer board (fluted)732 × 480 × 181
CLeg left, inner board732 × 480 × 181
DLeg right, outer board (fluted)732 × 480 × 181
ELeg right, inner board732 × 480 × 181
FModesty panel978 × 300 × 181
GDrawer bay divider382 × 128 × 181
HDrawer bay bottom382 × 330 × 181
IDrawer front326 × 83 × 181
JDrawer side350 × 52 × 182
KDrawer sub-front269 × 52 × 181
LDrawer back269 × 38 × 181
MDrawer bottom339 × 283 × 31

Hardware

All supplied, in bags.

  • ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×14Beech dowel Ø8×35, fluted
  • ×22Chipboard screw 4×30, countersunk
  • ×1Cable grommet Ø60
  • ×4Felt pad Ø28
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×1Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
  • ×1Allen key 4 mm

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABCDEFHMGJ ×2IKL

    Hardware

    • ×14 Beech dowel Ø8×35
    • ×22 Chipboard screw 4×30
    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×1 Joint connector bolt M6×70
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Parts

    ABCDEFHMGJ ×2IKL
  4. 4

    Step 4

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABCDEFHMGJ ×2IKL

    Hardware

    • ×1 Ball-bearing drawer slides
  5. 5

    Step 5

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×1 Cable grommet Ø60
    • ×4 Felt pad Ø28
    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp