Assembly guide
RIF Desk
Corner desk 140×140 · 1400 × 1400 × 750 mm · Item number rif-desk-corner-140
Before you start
- About 1 h 00
- Two people needed
- 2 packages
Tools
- Cross-head screwdriver
- Allen key (supplied)
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Desk top, L-shaped | 1400 × 1400 × 18 | 1 |
| B | Leg, back wing end, outer board (fluted) | 732 × 580 × 18 | 1 |
| C | Leg, back wing end, inner board | 732 × 580 × 18 | 1 |
| D | Leg, side wing end, outer board (fluted) | 732 × 580 × 18 | 1 |
| E | Leg, side wing end, inner board | 732 × 580 × 18 | 1 |
| F | Leg, inner corner, outer board (fluted) | 732 × 482 × 18 | 1 |
| G | Leg, inner corner, inner board | 732 × 482 × 18 | 1 |
| H | Modesty panel, back wall | 1266 × 350 × 18 | 1 |
| I | Modesty panel, side wall | 1284 × 350 × 18 | 1 |
Hardware
All supplied, in bags.
- ×2Cable grommet Ø60
- ×6Felt pad Ø28
- ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×16Cam cover cap Ø15, matching colour
- ×11Beech dowel Ø8×35, fluted
- ×15Chipboard screw 4×30, countersunk
- ×4Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
- ×1Allen key 4 mm
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Parts
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.