SHEBKA Side table

Side table 50×50 with shelf · 50 × 50 × 50 cm

15,400 DA

−15% launch discount on every reservation

Nothing to pay now. We call you to confirm, and you pay on delivery.

Finish : Walnut / black lattice

Cash on delivery
Reserve with no online payment: you pay on delivery.
Delivery
Delivered between Tue 3 Nov and Mon 9 Nov if you reserve today. Free delivery from 50,000 DA.
1 package · 7.3 kg
Tools: a Phillips screwdriver is all you need (a power drill helps).
1-year warranty included
A panel breaks in normal use: the replacement panel is free, delivery at your cost. Returns and warranty

Overview

Side table 50×50 with shelf: a band of lacquered lattice over natural cane on slim black steel legs.

50×50 cm, 50 cm high: an 18 mm top on a 150 mm band of lacquered lattice over natural cane, set 40 mm in, on four slim 25×25 mm black steel legs.
Each leg stands in an inside corner of the band: its welded plate is screwed under the top and two screws through the tube go into each apron, so the frame cannot rack.
The band is cam-locked into the top along every side; its solid border carries every joint, the lattice field is decoration only.
Lower shelf between the legs, 150 mm off the floor, screwed through all four legs: storage and a second brace at floor level.
SHEBKA collection — modern lattice.

Width

50 cm

500 mm

Depth

50 cm

500 mm

Height

50 cm

500 mm

Measure the space you have and the narrowest door on the way in.

Available widthcmAvailable depthcmAvailable heightcmDoor widthcm

Leave about ⁦2 cm⁩ on each side to assemble and place the piece.

Board	Melamine-faced chipboard 18 mm, E10.4 m² of board
Board	MDF 18 mm raw, E1 (for lacquer)0.2 m² of board
Board	Natural rattan cane webbing, open weave, 2 mm (cut by hand to the template, stapled into the rebate)0.1 m² of board
Edging	ABS edge band 2 mm2 m
Edging	ABS edge band 1 mm1.4 m
Decor	Walnut / black lattice

E1 · Wipe with a soft, slightly damp cloth, then dry. No abrasive cleaners or solvents.

×16Chipboard screw 3.5×16, pan head
×4Slim steel side-table leg 478 mm, 25×25 square tube, matt black, welded top plate 60×60 + 4 screws, levelling glide (+4 mm), drilled for the lower shelf and the apron screws
×4Chipboard screw 4×50, countersunk
×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
×8Cam cover cap Ø15, matching colour
×8Beech dowel Ø8×35, fluted

All hardware is included, ready to assemble.

1 package	Dimensions	kg
Package 1	53 × 53 × 7.6 cm	7.9
Total weight		7.9

Largest package: ⁦53 × 53 × 7.6 cm⁩. Check your lift or staircase.

Delivered flat with illustrated instructions. Every part is labelled, every hole pre-drilled.

10 parts

Tools: a Phillips screwdriver is all you need (a power drill helps).

Care

Wipe with a soft, slightly damp cloth, then dry. No abrasive cleaners or solvents.

How much does Side table SHEBKA cost in Algeria?: SHEBKA Side table 50×50 with shelf costs 15,400 DA. Launch discount: −15% on every reservation.
How much is delivery, and when does it arrive?: It arrives between Tue 3 Nov and Mon 9 Nov if you reserve today. Delivery costs 1,500 DA to all 69 wilayas, free from 50,000 DA.
How do I pay?: In cash, to the courier, when your packages arrive. No online payment is asked.
Is assembly difficult?: 10 parts delivered in 1 package, with the hardware and illustrated instructions. Every part is labelled and every hole pre-drilled. A Phillips screwdriver is enough.
Is it under warranty?: Yes, for one year from delivery, included in the price. If a panel breaks in normal use, the replacement panel is free; only its delivery is at your cost. A piece defective on opening is collected and refunded if reported within 7 days.
Where is it made?: In Algeria, by RYHANAH. The website is hosted in Algeria too.

15,400 DA

Side table 50×50 with shelf · Walnut / black lattice